Industrial by-products-derived binders for in-situ remediation of high Pb content pyrite ash: Synergistic use of ground granulated blast furnace slag and steel slag to achieve efficient Pb retention and CO2 mitigation.

Ordinary Portland cement (OPC) is a cost-effective and conventional binder that is widely adopted in brownfield site remediation and redevelopment. However, the substantial carbon dioxide emission during OPC production and the concerns about its undesirable retention capacity for potentially toxic elements strain this strategy. To tackle this objective, we herein tailored four alternative binders (calcium aluminate cement, OPC-activated ground-granulated blast-furnace slag (GGBFS), white-steel-slag activated GGBFS, and alkaline-activated GGBFS) for facilitating immobilization of high Pb content pyrite ash, with the perspectives of enhancing Pb retention and mitigating anthropogenic carbon dioxide emissions. The characterizations revealed that the incorporation of white steel slag efficiently benefits the activity of GGBFS, herein facilitating the hydration products (mainly ettringite and calcium silicate hydrates) precipitation and Pb immobilization. Further, we quantified the cradle-to-gate carbon footprint and cost analysis attributed to each binder-Pb contaminants system, finding that the application of these alternative binders could be pivotal in the envisaged carbon-neutral world if the growth of the OPC-free roadmap continues. The findings suggest that the synergistic use of recycled white steel slag and GGBFS can be proposed as a profitable and sustainable OPC-free candidate to facilitate the management of lead-contaminated brownfield sites. The overall results underscore the potential immobilization mechanisms of Pb in multiple OPC-free/substitution binder systems and highlight the urgent need to bridge the zero-emission insights to sustainable in-situ solidification/stabilization technologies.

Supported MOCVD TiO2 Thin Films Grown on Modified Stainless Steel Mesh for Sensing Applications.

Among semiconductor metal oxides, that are an important class of sensing materials, titanium dioxide (TiO2) thin films are widely employed as sensors because of their high chemical and mechanical stability in harsh environments, non-toxicity, eco-compatibility, and photocatalytic properties. TiO2-based chemical oxygen demand (COD) sensors exploit the photocatalytic properties of TiO2 in inducing the oxidation of organic compounds to CO2. In this work, we discuss nanostructured TiO2 thin films grown via low-pressure metal organic chemical vapor deposition (MOCVD) on metallic AISI 316 mesh. To increase the surface sensing area, different inorganic acid-based chemical etching protocols have been developed, determining the optimal experimental conditions for adequate substrate roughness. Both chemically etched pristine meshes and the MOCVD-coated ones have been studied by scanning electron microscopy (SEM), X-ray diffraction (XRD), energy dispersive X-ray (EDX) microanalysis, and X-ray photoelectron spectroscopy (XPS). We demonstrate that etching by HCl/H2SO4 at 55 °C provides the most suitable surface morphology. To investigate the behavior of the developed high surface area TiO2 thin films as COD sensors, photocatalytic degradation of functional model pollutants based on ISO 10678:2010 has been tested, showing for the best performing acid-etched mesh coated with polycrystalline TiO2 an increase of 60% in activity, and degrading 66 µmol of MB per square meter per hour.

Chemical and Mechanical Characterization of Unprecedented Transparent Epoxy-Nanomica Composites-New Model Insights for Mechanical Properties.

Two nanomicas of similar composition, containing muscovite and quartz, but with different particle size distributions, have been used to prepare transparent epoxy nanocomposites. Their homogeneous dispersion, due to the nano-size, was achieved even without being organically modified, and no aggregation of the nanoparticles was observed, thus maximizing the specific interface between matrix and nanofiller. No exfoliation or intercalation has been observed by XRD, despite the significant dispersion of the filler in the matrix which produced nanocomposites with a loss in transparency in the visible domain of less than 10% in the presence of 1% wt and 3% wt of mica fillers. The presence of micas does not affect the thermal behavior of the nanocomposites, which remains similar to that of the neat epoxy resin. The mechanical characterization of the epoxy resin composites revealed an increased Young's modulus, whereas tensile strength was reduced. A peridynamics-based representative volume element approach has been implemented to estimate the effective Young's modulus of the nanomodified materials. The results obtained through this homogenization procedure have been used as input for the analysis of the nanocomposite fracture toughness, which has been carried out by a classical continuum mechanics-peridynamics coupling approach. Comparison with the experimental data confirms the capability of the peridynamics-based strategies to properly model the effective Young's modulus and fracture toughness of epoxy-resin nanocomposites. Finally, the new mica-based composites exhibit high values of volume resistivity, thus being excellent candidates as insulating materials.

Activation of Vegetable Oils by Reaction with Maleic Anhydride as a Renewable Source in Chemical Processes: New Experimental and Computational NMR Evidence.

Vegetable oils are bio-based and sustainable starting materials that can be used to develop chemicals for industrial processes. In this study, the functionalization of three vegetable oils (grape, hemp, and linseed) with maleic anhydride was carried out either by conventional heating or microwave activation to obtain products that, after further reactions, can enhance the water dispersion of oils for industrial applications. To identify the most abundant derivatives formed, trans-3-octene, methyl oleate, and ethyl linoleate were reacted as reference systems. A detailed NMR study, supported by computational evidence, allowed for the identification of the species formed in the reaction of trans-3-octene with maleic anhydride. The signals in the 1H NMR spectra of the alkenyl succinic anhydride (ASA) moieties bound to the organic chains were clearly identified. The reactions achieved by conventional heating were carried out for 5 h at 200 °C, resulting in similar or lower amounts of ASA units/g of oil with respect to the reactions performed by microwave activation, which, however, induced a higher viscosity of the samples.

Quantitative Analysis of Plant Cytosolic Calcium Signals in Response to Water Activated by Low-Power Non-Thermal Plasma.

Non-thermal plasma technology is increasingly being applied in the plant biology field. Despite the variety of beneficial effects of plasma-activated water (PAW) on plants, information about the mechanisms of PAW sensing by plants is still limited. In this study, in order to link PAW perception to the positive downstream responses of plants, transgenic Arabidopsis thaliana seedlings expressing the Ca2+-sensitive photoprotein aequorin in the cytosol were challenged with water activated by low-power non-thermal plasma generated by a dielectric barrier discharge (DBD) source. PAW sensing by plants resulted in the occurrence of cytosolic Ca2+ signals, whose kinetic parameters were found to strictly depend on the operational conditions of the plasma device and thus on the corresponding mixture of chemical species contained in the PAW. In particular, we highlighted the effect on the intracellular Ca2+ signals of low doses of DBD-PAW chemicals and also presented the effects of consecutive plant treatments. The results were discussed in terms of the possibility of using PAW-triggered Ca2+ signatures as benchmarks to accurately modulate the chemical composition of PAW in order to induce environmental stress resilience in plants, thus paving the way for further applications in agriculture.

Plasma-Activated Water Triggers Rapid and Sustained Cytosolic Ca2+ Elevations in Arabidopsis thaliana.

Increasing evidence indicates that water activated by plasma discharge, termed as plasma-activated water (PAW), can promote plant growth and enhance plant defence responses. Nevertheless, the signalling pathways activated in plants in response to PAW are still largely unknown. In this work, we analysed the potential involvement of calcium as an intracellular messenger in the transduction of PAW by plants. To this aim, Arabidopsis thaliana (Arabidopsis) seedlings stably expressing the bioluminescent Ca2+ reporter aequorin in the cytosol were challenged with PAW generated by a plasma torch. Ca2+ measurement assays demonstrated the induction by PAW of rapid and sustained cytosolic Ca2+ elevations in Arabidopsis seedlings. The dynamics of the recorded Ca2+ signals were found to depend upon different parameters, such as the operational conditions of the torch, PAW storage, and dilution. The separate administration of nitrate, nitrite, and hydrogen peroxide at the same doses as those measured in the PAW did not trigger any detectable Ca2+ changes, suggesting that the unique mixture of different reactive chemical species contained in the PAW is responsible for the specific Ca2+ signatures. Unveiling the signalling mechanisms underlying plant perception of PAW may allow to finely tune its generation for applications in agriculture, with potential advantages in the perspective of a more sustainable agriculture.

Surface oxidation of single wall carbon nanohorns for the production of surfactant free water-based colloids.

In this work, powders of Single Wall Carbon Nanohorns (SWCNHs), a typical hydrophobic material, were oxidized with concentrated HNO3 with the aim of surface carboxylation and consequent improved hydrophilicity and dispersibility in polar solvents. Dynamic Light Scattering and ζ-potential measurements demonstrated that very stable colloidal suspensions of SWCNH in water were obtained in total absence of stabilizers. By properly optimizing the reaction parameters, the suspensions achieved stability even higher than colloids with similar composition but prepared with the use of surfactants. Surface damage and oxidation degree of SWCNHs were evaluated by SEM microscopy, Thermogravimetric Analysis, Residual Gas Analysis, XPS and UV-visible spectroscopy.

Nanostructured Tetrahedrite Synthesis for Thermoelectric Applications.

Nowadays, a big challenge in the thermoelectric field is the identification of efficient thermoelectric materials but inexpensive, easy to synthesize, and comprised of Earth-abundant elements. On this basis, tetrahedrite mineral family (Cu(12−x)Tr(x)Sb4S13 where Tr = Cu, Mn, Fe, Co, Ni, Zn) seems to be an attractive p-Type Pb-free thermoelectric material, showing a relatively high conversion efficiency. In this work, a solvothermal synthesis method was developed for undoped tetrahedrite Cu12Sb4S13 and the introduction of Zn and Ni as substituents of copper was also tested. The influence of the stoichiometry and the synthesis conditions on the tetrahedrite phase content and density of the samples were investigated by X-ray diffraction (with profile Rietveld refinements) and scanning electron microscope (equipped with energy dispersive X-ray spectroscopy). Preliminary sintering test were performed by Open Die Pressing.

Paramagnetic dithiolene complexes as metallo-ligands: ether/thioether coordination.

The secondary coordination ability of a paramagnetic nickel dithiolene complex, bearing an ether coordinating function within a nine-membered flexible ring, has been demonstrated in its [NiCl(DMF)(2)](+) complex, through coordination by both ether and thioether functions, allowing for a ferromagnetic interaction between both paramagnetic entities.

Molecular, electronic, and crystal structures of self-assembled hydrothermally synthesized Zn(II)-mercaptonicotinate: a combined spectroscopic and theoretical approach.

A Zn(II) 2-mercaptonicotinate coordination polymer (Zn1), with Zn(II) ions chelated by both sulfur and oxygen in a distorted square pyramidal environment, and a molecular Zn(II) 2-hydroxynicotinate complex (Zn2) were synthesized by the reaction of zinc acetylacetonate with 2-mercaptonicotinic (Zn1) and 2-hydroxynicotinc (Zn2) acid, respectively, under hydrothermal conditions. The crystal structures of Zn1 and Zn2 were determined by single crystal X-ray diffraction measurements. Dispersion-corrected density functional theory (DFT) calculations reproduce very well the experimental structures and show that Zn1 is stable against hydration, whereas Zn2 is stable against dehydration over wide ranges of temperature and pressure, in agreement with thermogravimetric analysis results. The electronic structure of the two compounds is computed with the DFT+U method. The theoretical valence band agrees well with the X-ray photoelectron spectroscopy experiments. Furthermore, the band gap of Zn1 is found to be narrower than that of Zn1 and is characterized by the presence of sulfur lone pairs at the edge of the valence band.